The idea for a new SparkBlocks sound system started when Mark and a friend came across a LEGO® stereo model. It looked beautiful, but it didn't play anything. She said it would be cool if we could do something with it, and Mark's answer came straight away: we can.
We started out picturing people building their own portable stereos out of bricks, but since then, the question has grown much bigger: what else can we build and teach with sound?
Our builds have never needed a screen or an app. These ones may let you connect a phone or another audio source to choose the music, but the sound circuit itself is still made of bricks that click together.
Pulling the speaker apart
Every Bluetooth speaker does three jobs, usually sealed inside one case:
- A Bluetooth receiver picks up audio from a phone or tablet.
- An amplifier boosts that signal until it's strong enough to drive a speaker.
- The speaker turns it into sound.
We wanted those parts out in the open. In the Intro Kit, each part of a circuit is its own block, and you connect them into something that works. We're taking the same approach here, so we imagined the receiver and the amplifier becoming two separate bricks. You'd be able to see which part does which job, then decide what to build around them. Each of those parts had to earn its place in a brick. But that's where things become tricky.

Splitting a speaker up raised problems a sealed one never has to deal with. Each piece had to fit inside a small brick, and most Bluetooth parts were either too big or built to send data, not sound. Parts that looked right on paper didn't always hold up once we built them, and the amplifier took more attempts than anything else, because it had to be loud enough to enjoy without getting too loud. We also need to know exactly what's inside every component we use, down to the chip, and the bricks have to keep working when someone connects them in a way we didn't plan, because that's how people build.

None of that has been quick, but there have been good moments along the way. One of our favourites was the first time a prototype showed up in a phone's Bluetooth list as "SparkBlocks". The pieces now work together on the bench, and the boards are heading into another round of testing.
Building around the sound
What excites us most is what happens around the electronics. Once a speaker is part of a build, the bricks around it could shape how it sounds, and that's something a child could experiment with and hear for themselves. Someone could build a copy of the stereo that started all this, or something nobody has thought of yet, then pick the song that plays through it.
There's still a lot of prototyping ahead of us, but we hope to have something to share next year. Until then, the LEGO® stereo that started all this is still on Mark's shelf, still silent. We're working on the bricks that would let it play.
SparkBlocks is not affiliated with or endorsed by the LEGO® Group.





